Creative professionals, music lovers and anyone who wants the flexibility to stream both wired and wireless sound into high-quality studio monitors can count on JBL 104-BT(B) to provide an accurate, reliable sonic reference and a truly enjoyable listening experience. Proprietary coaxial driver combines 4.5-inch (118 mm) woofer and. Tweeter for transparency and wide sweet spot. Reference mixes via Bluetooth 5.0 streaming. Integrated 60-watt Class D power amplifier; 30 watts distributed to each speaker.Acoustically optimized for desktop placement. Molded ABS cabinet with contoured low-frequency port. Three sets of inputs allow connection with professional equipment, personal music players and consumer devices. Master monitor includes electronics for the extension monitor, minimizing wiring and clutter.
Front-panel input control selects Bluetooth, Aux, RCA, TRS or combines all inputs. Front-panel volume control and headphone jack with speaker mute feature. Extension monitor speaker wire (2-conductor, 2 meters). 3.5 mm to RCA audio cable. System input type: bluetooth, 1/8" aux, rca, 1/4" trs balanced.
Input selection options: bluetooth, aux, rca, trs, all. System output type: 1/8 stereo headphone with auto speaker mute. Lf transducer: 4.5 in (118 mm).
Hf transducer: 0.75 in (19 mm), soft dome. Crossover: 1725 hz, 1st order.
Power amp: 60 w (30 w each speaker), class d. Maximum continuous spl: 89 db. System peak spl: 102 db (pink noise, 12 db crest factor).Maximum spl, momentary peak: 104 db. Maximum peak input level(-10 dbv / +4 dbu): +6 dbv / +20.3 dbu. Frequency range (-3 db spl): 88 hz - 20 khz.
Frequency range (-10 db spl): 60 hz - 20 khz. Cabinet tuning frequency: 72 hz.Signal to noise ratio: 75 dba (a-weighted), 70 dbr (unweighted), relative to 2.83 vrms output on hf. Coverage (horizontal x vertical): 120º x 60º. Acoustic test specification: ats# 1000340443. AC input voltage: 100 - 240 vac (±10%), 50 / 60 hz. Electrical current draw (w) idle 100 / 240 vac: 3.52 / 3.70. Electrical current draw (w) max power 100 / 240 vac: 80 / 80.
Electrical current draw (w) low power standby mode 100 / 240 vac: 0.34 / 0.46. Enclosure material: abs with metal grille.Enclosure finish: 104-bt: matte black acrylic paint. 104-btw: matte white acrylic paint. Height: 9.72 in (247 mm). Width: 6.02 in (153 mm). Depth: 4.88 in (124 mm). Net weight: master monitor: 4.54 lb (2.06 kg). Slave monitor: 3.81 lb (1.73 kg). How to Setup a Rockville Condenser Microphone with Your Computer.
This model is similar to our RCM01 however it is made of aluminum, and the frame is slightly larger. We also upgraded this model to a high end metal anti-wind cap! We highly recommend this design.
Multi-Purpose Designed for crystal clear capturing of vocals, acoustic and amplified instruments, as well as room reverb. The aluminum construction makes the RCM03 tough enough for Live sound applications as well! This microphone can be used in multiple ways.
You can connect this to the phantom power of your mixer or you can connect it directly to your computer sound card. We include a cable to connect it to your mixer as well as a cable to connect the mic to your computer! Quality built inside and out! The microphone is made of aluminum.
It is very rugged and tough like you would expect from any Rockville product. This microphone has a large diaphragm which is what enables our mic to deliver a wider range of high and low frequencies than our competitors. Our frequency range is tested at 30HZ - 20KHZ! The mic sounds crystal clear sound with no distortion! The PCB (circuit board) uses surface mounted components which is the same method the expensive brands use.
We use only top components that under-go extreme testing by our own audio engineers. The last thing that I need to mention and call out is that our product is very sturdy.When you are recording, you do not want even the slightest noises coming from your mic. The microphone consists of a casing and there is a cartridge inside the case. You do not want that cartridge moving around. We made sure to adjust our mechanism and ensure the cartridge is firmly in place and not creating any unwanted noises.
RCM03 Condenser Microphone made of aluminum! 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device. 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power. Rockville RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount.Polar Pattern: Internally Polarized Condenser Cardioid Design. Large diaphragm for smooth, natural sound and low noise.
Power Requirements: 48V DC Phantom Power. Output impedance: 200O±30%(at 1kHz). Operating voltage range: 1.5V-10V.
Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB. Frequency Response: 30Hz - 20 KHz.Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz. Load impedance: Greater or = to 1000 Ohms. Equivalent Noise level: Less than 18dB A (IEC581-5). Input SPL: 126dB(THD=1.0% at 1kHZ). Electrical current: Greater than 4.8Ma. Microphone body net weight:320 Grams (0.7 Pounds). Diameter 44mm (1.73 inches). Microphone Length 217mm (8.54 inches). Microphone material: steel grille + Alluminum (handheld part). About Rockville Quality Control Procedures. The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry. Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality. Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production.
During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control. They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a.To replace the item for a brand new one. All replacements and exchanges are free.
This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Speakers". The seller is "audiosavings" and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, Ukraine, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Panama, Trinidad and Tobago, Guatemala, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.