KLA181A Power Module Subwoofer Continuous Class D Active Power Amplifier 1000W

  

Designed Beeswax Machine Beeswax Embossing Machine Foundation Cell Size 4.9mm. 100ml Hydrothermal Autoclave Reactor with Teflon Chamber Vessel Kettle Synthesis. EPC-A12 Servo Edge Position Controller Stroke 150mm Web Guide Control System.

GAA21750AK3 TT Elevator Debugger Lift Test Tool Unlock Blue Server + AVO Adapter. XYZ Axis 60MM60MM Manual Linear Stages Bearing Tuning Platform Sliding Table. Fiber Optic Inspection Microscope 3.5 400X Video Fiber Inspection Probe APC+UPC. 200 300 500 Sieve Mesh-Electric Vibrating Sieve Machine Chinese Medicine. KLA181A Power Module Subwoofer Continuous Class D Active Power Amplifier. Onboard mixer with two combo XLR and ¼ inputs, and stereo RCA inputs, (three audio input sources); two direct channel outputs and single summed balanced output. Extensive DSP enhances system performance. DMT(Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones. Intrinsic Correction, first featured in our high-end line-array products maps 65-75 spatially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat band pass target.

The result is a speaker that behaves equally well across the entire sound field. DEEP and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies. GuardRail protection protects both the amplifier module and your performance from unnatural and destructive clipping.

1000 W Class D continuous. Power, Attenuation, LF Mode (Normal/DEEP), Polarity (Normal/Reverse), Front LED (Pwr/Limit/Off).

Balanced female XLR line level input, Balanced male XLR full range line level out, Remote attenuation control, Locking powerCON power connector AC In, Locking powerCON® power connector AC Out. On demand, 50 mm variable speed fan.

Thermal limiting, output overcurrent, overtemperature muting, GuardRail. Universal power supply 100-240 VAC, 50 to 60 Hz. AC Power Consumption (1/8 of full power). 100 VAC, 2.3 A 120 VAC, 2.01 A 230 VAC, 1.13 A.