The system shall be a multiple driver, full-range portable loudspeaker system with internally supplied power amplification and active equalization for multiple operating modes as follows. The transducer complement shall consist of six 2.00" (51 mm) high-excursion drivers mounted in a curved Articulated Array loudspeaker coupled with an integral 8" (203 mm) low-frequency driver mounted in a ported bass enclosure. The loudspeaker array shall be wired in a series/parallel configuration. The nominal horizontal beamwidth of the loudspeaker shall be 180°, and the vertical coverage shall be 40.
° The systems power stand shall incorporate a ported venting system for the low-frequency driver, tuned for 65 Hz. The power amplification for transducers shall be supplied by the integrated power stand providing 130 W continuous pink noise, band-limited from 65 Hz to 14 kHz (-3 dB).
The enclosure of the power stand shall be constructed of polypropylene materials. The extension and array shall be constructed of ABS materials.In collapsed tabletop mode, the systems outer dimensions shall be 16.5" H x 13.25" W x 16.75 D (418 mm x 339 mm x 426 mm). Its weight shall be 24.6 lbs. In extended operating mode, the systems outer dimensions shall be 78.5" H x 13.25" W x 16.75 D (1995 mm x 339 mm x 426 mm).
Its weight shall be 29.2 lbs. The system shall be capable of two operating modes; collapsed tabletop or extended position by integrating height-extension modules. The loudspeaker shall be the Bose L1 Compact portable line array system. The L1 Compact system complies with the following standards. UL/IEC/EN 60065 7th Edition Safety Standard for Audio and Video Equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. This product complies with the Canadian ICES-003 Class A specifications.
This product conforms to the EMC Directive 2004/108/EC Under standards: EN55103- 1 & 2: 1997, Environment 2. How our Loudspeakers are Measured. More Information Technical literature and other materials are available at pro. High-performing, self-powered, portable two-way loudspeaker system designed for the production and reproduction of live music, music playback.Speeches and A/V sound reproduction. Spatial Dispersion loudspeaker technology produces wide, uniform sound coverage throughout the entire listening area - even off to the extreme sides. Integrated ToneMatch presets contain hardwired equalization curves for dynamic handheld microphones and acoustic guitars. Offers both collapsed and extended setup positions. For smaller spaces with audiences of up to 100.
Frequency Range (-3 dB): 65 Hz 14 kHz. Frequency Range (-10 dB): 50 Hz 16 kHz.
Crossover Frequency: 400 Hz 4th order Butterworth. Nominal Coverage Pattern: 180° H x 40° V.
Distortion at Rated Power: 0.1% Max 30 Hz 15 kHz. High-Frequency Drivers: (6) 2.00 HF drivers. Low-Frequency Driver: (1) 8 LF driver.
Channel 1 Microphone Only Input. Red = Clip (limiter active). ToneMatch® Preset: NOTE: The ToneMatch equalization is always engaged on Channel 1 and cannot be bypassed. The preset is designed to optimize a dynamic handheld microphone for the L1 Compact system.Channel 1 Microphone Only Input (continued). Input: XLR Balanced Pin 1 (GND), Pin 2 (+), Pin 3 (-).
Channel Gain: -Infinity to +50 dB. Max Input Signal: +8 dBu.
Input Impedance: 2.4 k. Channel 2 Line and Instrument Inputs. ToneMatch Switch: NOTE: This switch engages ToneMatch equalization only to the ¼ input. When in the OFF position, no EQ is applied. ¼ = -Infinity to +40 dB.18 and RCA = -Infinity to +24 dB. ¼ = 800 k 1. RCA = 12.5 k. Line Output: ¼ balanced TRS or unbalanced TS Nominal +2.2 dBu Max +20 dBu. Record Out: (2) RCA unbalanced Nominal -3.8 dBu Max +14 dBu. Enclosure and Extensions: Enclosure: Polypropylene Extension + Array: ABS. L1 Compact Collapsed Position: 24.6 lbs.
(11.2 kg) 16.5" H x 13.25" W x 16.75 D (418 mm x 339 mm x 426 mm). L1 Compact Extended Position: 29.2 lbs. (13.3 kg) 78.5" H x 13.25" W x 16.75 D (1995 mm x 339 mm x 426 mm). L1 Compact Extensions (2): 2.3 lbs.
(1.05 kg) each 32.5" H x 2.75" W x 2.75 D (830 mm x 70 mm x 70 mm). L1 Compact Power Stand: 30.4 lbs.
L1 Compact Extensions: 7.5 lbs. 100-240 V 50 / 60 Hz +/- 20%. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a.
To replace the item for a brand new one. All replacements and exchanges are free. Item Code: L1 Compact System. The item "Bose L1 Compact System 130w Portable Line Array Powered PA DJ Speaker withMixer" is in sale since Monday, August 23, 2021.
This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Speakers". The seller is "audiosavings" and is located in Inwood, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.