(2) KRK CL8G3 CLASSIC Studio Monitors 8 Powered Speakers+Stands+Pads+Subwoofer

(2) KRK CL8G3 CLASSIC Studio Monitors 8 Powered Speakers+Stands+Pads+Subwoofer. Condition: BRAND NEW IN ORIGINAL PACKAGING.

(2) KRK CL8G3 CLASSIC 8 Studio Monitor Active Powered Bi-Amped 2-Way Speaker. (1) KRK S10.4 10 Powered Studio Subwoofer Generation 4 S10 Sub Class D. (1) Rockville RVSM1 Pair of Near-Field Studio Monitor Stands w/ Adjustable Height. (1) Pair Rockville RRS190S Foam Studio Monitor Isolation Pads 7.5" x 9.5"/3 Angles. Borrowing concepts from previous ROKIT linessome of the most used studio monitors in the world, the CLASSIC series defaults to a new flat frequency solution towards more critical listeningtranslating into more accurate mixes. With the optional ability to engage the +2 dB KRK Bass Boost, the CLASSIC series can also provide the enhanced bass response and sound that music creators around the world have loved for years.

The CLASSIC series are active (self-powered) two-way studio monitors that utilize a 1 textile soft dome tweeter paired with a 5, 7, or 8 (depending on the specific model) glass aramid woofer. The built-in biamped power amplifiers provide a total of 50, 73, or 100 watts of power (again, depending on the model), and all models in the series deliver natural and balanced spectral response with low distortion and superior stereo imaging.

With KRK studio monitors, youll hear every nuance of the audio being reproduced. System type: Active Studio Monitor. Low-Frequency Transducer: 8 Glass Aramid Woofer.

High-Frequency Transducer: 1 Textile Soft Dome Tweeter. Frequency Response (+/- 3dB): 42.5Hz - 28kHz.

Frequency Range (-10dB): 35Hz - 35kHz. Average Beamwidth (Horizontal): 144 Degrees (900 Hz 9 kHz). Average Beamwidth (Vertcal): 120 Degrees (900 Hz 9 kHz). Max Peak SPL (With Limiter): 106 dB.

Max Average SPL (With Limiter): 103 dB. Max Calculated SPL: 106 dB. High Frequency Power Output (Watts): 25 Watts. Low Frequency Power Output (Watts): 75 Watts. Input Impedance (Ohms): 10 K Balanced / 7 K Unbalanced.

Input Sensitivity: 2 dBu Balanced / -15 dBV Unbalanced. SNR (Signal to Noise Ratio): > 100 dB. Controls: System Volume -30 dB - +6 dB.

LF Level Adjust: (-2 dB, -1 dB, FLAT, +2 dB) Below 200 Hz. HF Level Adjust: (-2 dB, -1 dB, FLAT, +1 dB) Above 2.0 kHz. Input Connectors: RCA, Balanced 1/4 TRS, Balanced XLR.

AC Fuse (Slow Blow / Time Lag): 120 VAC (T2AL, 250 V) 240 VAC (T1AL, 250 V). Idle (Mute) AC Power Consumption: 10 Watts (NA SKU). Idle (Standby) AC Power Consumption. Maximum AC Power Consumption: 184 Watts (NA SKU).

Enclosure Construction: 15 mm MDF / High Impact Polystyrene. Product Dimensions (H x W x D): 12.40" (315 mm) x 10.82" (275 mm) x 15.60 (396 mm). Product Weight: 24.6 lb (11.16 kg). Building on KRKs legacy of sonic accuracy and performance, the new KRK S8.4, S10.4, and S12.4 subwoofers deliver tight, accurate, and defined bass, while their highly efficient Class D power amplifiers dramatically increase transient response, control, and punch.

A wealth of connectivity options means you can hook up to practically anything without adapter hassles, and a four-position crossover frequency selection switch makes it easy to adjust the subwoofer setting to optimally match your existing monitors. Refinements in the latest generation of KRK subwoofers include modestly improved low frequency extension, improved porting for much better low frequency phase response and less port noise, a more durable inverted dustcap, optional removable grilles, redesigned cabinets with lower height profiles and less depth than their predecessors for improved placement flexibility, and a timeless design with a more professional aesthetic. This allows for instant comparisons with and without the subwoofers contributions to the sound.

KRKs new subwoofers dont just deliver precise bass and a rich feature set; theyre the next dimension in subwoofer performance. FREQUENCY RESPONSE (+/- 3dB): 30 Hz - 110 Hz. FREQUENCY RANGE (-10dB): 27 Hz - 156 Hz. MAX PEAK SPL: 117 dB SPL. INPUT IMPEDANCE: 9.4 k OHMS BALANCED / 9.2 k OHMS UNBALANCED.

INPUT SENSITIVITY (STANDARD AND HIGH). POLARITY (0 OR 180 DEGREES). SUB AND HPF BYPASS (WITH OPTIONAL FOOTSWITCH ONLY).

ENCLOSURE CONSTRUCTION: 15 mm / 18 mm REINFORCED MDF. FINISH: BLACK VINYL WRAP, BAFFLE - BLACK PAINT. DIMENSIONS 13.4375 (341 mm) x 18.875 (479 mm) x 12.1875 (310 mm). How to Set Up your RVSM1. These heavy-duty Near-Field monitor stands are designed with home and project recording studios in mind. The height is adjustable for listening while sitting or standing, and locks in place with a security pin. Three rubber pads on the bottom of the base keep this stand stable on any surface. The entire stand breaks down into four pieces for easy storage and travel. EVA Pad on top to eliminate unwanted vibrations. Triple enforced steel base with ultimate sturdiness. Adjustable height Range: 33-45 inches.

Base: 17.7 x 17.7 x 17.7 inches. Top Plate: 9.05 x 9.45 inches. Tube Diameter: 1.5 inch- 1.37 inch.

Whenever you see the Rockville shield on a product you know that it has the stamp of approval. While other companies simply import products from China, Rockville manufactures the products in China to lower your cost but do so under American style supervision and quality standards to get you that USA quality that you want!

About Rockville Quality Control Procedures. The Rockville brand stands for Quality, Innovation and Value. All Rockville products go through the most rigorous quality control standards in the industry.

Products go through months of extensive testing before they reach your hands. All user functions are tested and all internal components are tested for quality.

Rockville makes products that are virtually un-breakable! Rockville is one of the only brands in its class to test every concept model for weeks or months before starting production. Once production begins, Rockville sends product engineers to their factory to quality control every line of production. During production every product is tested and on top of that Rockville goes the extra mile and has their high level product engineers do an additional quality control.

They test a certain percentage of all products from the production line a second time to ensure that the quality meets their vigorous standards, and to make sure that there is never a batch of products with even a slight problem. Great features and great quality make Rockville a great choice. The Rockville RRS190S is specially designed to increase monitoring accuracy.

These are made to decrease unwanted vibrations and noises so that you are left with accurate sounds. No matter how good your monitors are, they can never sound the way they were meant to if they are carrying over vibrations and unwanted noises into your music. These are 7.5" by 9.5" and includes 2 pads which will accommodate (2) monitors. Rockville isolation pads are designed to acoustically isolate your studio monitors.

They were designed to work in studios and give studio quality sound; however some customers will also use them for high end home theater setups. Typically when speakers are placed on hard surfaces, they can vibrate. The vibrations cause the speakers sound to become inaccurate, unfocused and lose their musical transparency.

The Rockville Isolation Pad package includes a pair of high-density acoustic foam pads with multiple angle inserts that allow you to fine-tune your speakers positioning. Though conceived and designed for studio monitors/speakers you can decouple and isolate any sensitive studio device such as DVD players, turntables and laptops.

How to get maximum performance from your Monitors! Rockville Studio Isolation Pads are the most cost-effective improvement you make to your sound system. Imagine the isolation pads as being your speaker systems shock absorbers.

Place the Rockville Isolation Pads under your monitors they will absorb vibrations and decouple your monitor to stop vibrations that would otherwise transfer into your studio environment. Isolation Pads will make a day and night difference in the sound quality of your studio. Rockville Studio Isolation Pads Feature. Easiest and affordable way to improve your studio monitors sound. Decouples your studio monitors from desktops and monitor stands for accurate reproduction.

Each package contains 2 Isolation Pads - enough for 2 studio monitors. 2-part angled design provides you with a wide range of tilt options, including flat, +/-4 degrees, and +/-8 degrees. Supports up to 100 lbs.

So they can isolate a variety of studio gear. Decouple your monitors for super-accurate sound What Rockville Isolation Pads do is called decoupling.

When your monitors sit on your desk or floor, they transmit vibrations that cause the surface that they're sitting on to vibrate at low bass frequencies. These bass vibrations dont get recorded in to your mix because they are not really in your mix. But when you play the mix in your studio the coupled vibrations, will be heard giving you false sound reproduction.

But because these coupled vibrations are not being recorded when you play your mix outside of your studio, all those low bass frequencies will be gone. By decoupling: your monitors, you eliminate these false low frequency vibrations, helping you to create accurate mixes that will sound great on any playback system. Perfectly position your monitors Rockville Isolation Pads allow you to position your studio monitors at the exact angle you need. Each pad comes in two pieces, each with a 4 degree angle. That allows you to tilt your monitor at one of five different angles: flat, +/-4 degrees, or +/-8 degrees. This allows you to place your monitors flat on your desk top or angled down for proper positioning. The most affordable way to improve the sound of your studio monitors. Rockville RRS190S: Monitor Isolation Pads.

3 Angle High Density Foam. 7.5" x 9.5". High quality, High Density Foam.

Eliminates vibrations and unwanted noises in your studio. Price is for (2) pads which accommodates (2) speakers. If your item is defective or you want to return it for any reason within the first 30 days of when it was delivered to you; you have the following options. We will send you a.

To replace the item for a brand new one. All replacements and exchanges are free. Item Code: (2) CL8G3+S10.4+RVSM1+RRS190S. The item "(2) KRK CL8G3 CLASSIC Studio Monitors 8 Powered Speakers+Stands+Pads+Subwoofer" is in sale since Friday, July 23, 2021. This item is in the category "Musical Instruments & Gear\Pro Audio Equipment\Speakers".

The seller is "audiosavings" and is located in Inwood, New York. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.

Brand: KRK
MPN: (2) CL8G3+S10.4+RVSM1+RRS190S
UPC: 613817041700
Type: Studio Monitor
Model: (2) CL8G3+S10.4+RVSM1+RRS190S
Connectivity: Wired
Features: 2-Way Configuration, Active, Amplified
Audio Inputs: RCA, Balanced 1/4" TRS, Balanced XLR
Country/Region of Manufacture: China
Color: Black